How long do fire doors protect you for?

There are different grades of fire door, and each one provides a different level of protection. The grades are separated by how long they can withstand fire. The main ones are FD30 (30 minutes), FD60 (60 minutes) FD90 (90 minutes) and FD120 (120 minutes).

Where are fire doors required?

All regulations pertaining to the use of fire doors are contained in Fire Safety: Approved Document B and following incorporations. According to the legislation, fire doors are required in domestic buildings over 2 storeys high; each door leading to a stairwell (at every level) from a habitable room (not a bathroom, for instance) must be a fire door. For commercial or non-domestic buildings, fire door requirements vary according to whether escape routes are vertical or horizontal (down stairs or through corridors).

Who enforces the Regulatory Fire and Safety Order?

The Regulatory Fire Safety Order is enforced primarily by the area’s local Fire and Rescue Authority (FRA). However, other organisations may enforce fire safety regulations in special circumstances, such as the Health and Safety Executive (HSE) or the Secretary of State for Defence’s fire service. If you are unsure as to where your FRA is based, you can either contact your nearest fire service or consult the National Fire Chief’s Council website.

What is fire protection?

The aim of a fire protection system is to safeguard a building’s occupants and minimise the damage associated with fire. Overall, the goal is to provide the widest possible window for a safe evacuation, whilst also reducing potential repair costs.\n\nFire protection systems can be categorised as either active or passive. While active systems are designed to detect and fight fires (such as fire alarms and sprinklers), passive fire protection describes the structural measures which prevent the passage of flames and smoke.

What is fire prevention?

Fire prevention systems are put in place so a building’s fire load is as low as it can possibly be. ‘Fire load’ is a term used by fire protection professionals to gage the potential severity of a fire in a building, based on the presence of certain hazards. Essentially, fire prevention reduces the likelihood of a serious fire. By safely storing combustible materials, and taking care of points of ignition (such as heating systems and plug sockets), we are reducing the risks associated with fire.

What is fire suppression?

The sole objective of a fire suppression system is to extinguish a fire as quickly as possible. \nOnce occupants are alerted to the presence of a fire, the system will begin to emit a concentrated substance to suppress the flames. The exact nature of this substance can vary, based on the environment the system is designed to protect. Common examples include carbon dioxide and inert gas, as well as a range of both liquid and dry chemical agents.

What is active fire protection?

Fire protection measures categorised as ‘active fire protection’ all react to action or motion. Fire alarms, for instance, must be activated to bring attention to a fire. Similarly, a fire extinguisher must be actively used in order to put out a fire. Fire sprinklers are also an example of active fire protection. This is because they are automatically activated in order to suppress a fire.

What is passive fire protection?

The term ‘passive fire protection’ describes structural measures implemented to prevent a fire from spreading within a building. Specialist contractors will be brought on as part of the building process to advise on passive fire protection measures, which can include compartmentation, firestopping and fireproofing using intumescent paint. According to Global Market Insights, the passive fire protection market is estimated to be worth $31 billion by 2026.

Why is concrete resistant to fire?

There are three main reasons why concrete has been categorised as one of the most fire-resistant materials; concrete is non-combustible, it’s non-toxic and it has low thermal conductivity. This means that it does not easily transfer thermal energy, and does not react easily with other substances (meaning that in the event of a fire there are no noxious gases released). This makes concrete one of the safest and most effective materials for structural fire protection.

What were the changes to building regulations after Grenfell?

The biggest change to building regulations post-Grenfell was a proposed ban on the use of combustible materials in the external walls of residential buildings over 18 metres in height.

Can a building collapse from fire?

A comprehensive enquiry into Grenfell Tower unearthed a chain of structural and maintenance failures leading up to the fire. A number of structural elements in a building can be damaged from fire, across a variety of temperatures and speeds. Therefore, a collapse can occur across multiple stages of severity. The most common cause of building collapse is damage to non-structural elements, which then increases the risk of structural exposure to fire. These elements include false chimneys, roof coverings, and windows.

What is the main objective of compartmentation?

One of the biggest risks in a fire is the spread of smoke and toxic gases. If not handled correctly, any attempt to evacuate a building will be hindered by the spread of smoke. Airflow between doors and rooms can push flames and smoke throughout a building. This is called the ‘chimney effect’. Compartmentation aims to mitigate this effect, controlling the spread for a prescribed period of time.

How does intumescent paint work?

The word ‘intumescent’ is derived from the Latin word “tumesco”, meaning expand or swell. Intumescent paints or sealants undergo an endothermic process, meaning the materials within the paints expand when exposed to high temperatures. Intumescent coatings are applied to steel frameworks in buildings, offering enhanced fire protection without affecting the steel’s mechanical properties. There are several ways to apply intumescent paint, the most common being spray-application as a film coating. Intumescent paint can be applied to steel, timber and an array of composite materials. Some varieties of intumescent paint can be given a decorative finish. In this instance, we would engage with the manufacturer to ensure that all the solutions we use are compatible with specific materials.

How much does intumescent paint expand?

The rate of expansion for intumescent paint depends on its thickness. Thin-film coatings will expand at a rate of 50:1, as a general rule of thumb. This means that a 1mm coating will reach an estimated density of 50mm in the event of a fire. Thick film coatings expand at an approximate rate of 5:1. It is worth mentioning that if a project intends to apply intumescent paint, then several aspects of the building should be designed to accommodate the rate of expansion.

How does a fire suppression system work?

A fire suppression system will have built-in components to detect fires as early as possible. These components will first identify the presence of flames and smoke. The suppression system will then initiate an alarm, so the blaze can be subdued before it has the chance to spread.

When is a fire suppression system required?

Fire suppression systems should be installed in buildings where a sprinkler system may not be the most effective method of fire protection. These can include rooms which contain a large amount of electrical equipment, or perishable items that could be susceptible to water damage. Although a fire suppression system is not legally required in the UK, property owners, be they commercial or residential, are responsible for carrying out fire risk assessments. This assessment, whether conducted internally or externally, may reveal the need for a fire suppression system. Further information can be found in our article on who exactly is responsible for fire safety legislation.

Latest News

Fire Safety Guides

What is a fire suppression system and how does it work?

A fire suppression system is an integral part of any fire protection infrastructure. ‘Fire suppression’ is a collective term for any engineering groups of units that are designed to put out a...

Fire Safety Guides

Who is responsible for enforcing fire safety legislation?

Over the last few years, fire safety legislation has been developed and refined so that all roles and responsibilities are assigned to the right people. Landlords and building owners must comply with...

Industry News

What are the main causes of fire in the hospitality industry?

Fire poses a significant risk to the hospitality sector. Apart from causing costly damage and bringing operations to a halt, it can seriously undermine your organisation’s brand. The evidence...

Passive Fire Protection

Important regulations for intumescent paint in steel buildings

The UK’s intumescent paint industry has undergone significant changes over the past two decades. Driven by technological innovation, it’s now a highly specialised sector that offers buildings...

Passive Fire Protection

What are the best fire-resistant building materials?

Part of a successful passive fire protection strategy is reviewing construction materials for their ability to inhibit the spread of fire. This ensures the right levels of protection for a building...

Passive Fire Protection

What are fire doors and how do they work?

Fire doors are an integral part of a building’s passive fireproofing plan. They’re used for fire compartmentation – a process that places physical barriers in strategic areas around a...

Passive Fire Protection

An expert guide to fire protection between floors

In the event of a fire, the spread of flames and smoke must be stopped as quickly as possible. This can be achieved through compartmentation - the application of firestopping materials to walls,...

Passive Fire Protection

What is the difference between fire protection, prevention and suppression?

Fire protection, prevention, and suppression systems are all fundamental to safeguarding a building from fire. However, some people may be unsure as to how these systems may differ. Rather than using...

Fire Safety Guides

What are the phases of a fire safety inspection?

Fire safety inspections are a fundamental part of ongoing building regulations. The Regulatory Reform (Fire Safety) Order 2005 dictates that a fire risk assessment is carried out at least once a year...

Industry News

Emerging fire protection and suppression technologies

The fire protection industry is amid some exciting technological developments. While the core tenets of fire protection remain the same, new products allow for solutions that are more efficient and...

LONDON OFFICE

SEVENOAKS OFFICE

Latest News

Filters

What is a fire suppression system and how does it work?

Who is responsible for enforcing fire safety legislation?

What are the main causes of fire in the hospitality industry?

Important regulations for intumescent paint in steel buildings

What are the best fire-resistant building materials?

What are fire doors and how do they work?

An expert guide to fire protection between floors

What is the difference between fire protection, prevention and suppression?

What are the phases of a fire safety inspection?

Emerging fire protection and suppression technologies

For any enquiries or questions, please call 02036038728 or contact our team via the form below

0

Year Established

0+

Buildings Protected

0+

Contracts Awarded

0

Industry Accreditations